Professional Plumbing Remodeling in Clayton, NC

If you're planning a bathroom or kitchen remodel, the plumbing work behind the walls is the part that determines whether the project goes smoothly or turns into a headache six months later. Moving fixtures, upgrading drain lines, and making sure everything vents properly — that's the infrastructure your new finishes depend on. Getting the plumbing right during a remodel is also the most cost-effective time to do it, because the walls are already open and access is easy.

A bathroom remodel in Apex typically runs between $8,000 and $25,000 depending on scope. A basic refresh with new fixtures, a vanity, and updated tile hits the lower end. A full gut-and-rebuild with layout changes, custom tile work, and relocated plumbing lands at the higher end. Most of our Triangle customers fall in the $12,000-$18,000 range for a primary bathroom renovation that updates everything without moving walls.

Kitchen remodels involving plumbing changes run higher, $15,000-$50,000+, mostly because moving a sink, adding a pot filler, or relocating a dishwasher drain means opening walls and potentially modifying vent stacks that tie into the main drain system.

Those numbers are Triangle-specific. Labor rates, permit fees, and material costs in the Raleigh-Durham metro drive pricing differently than national averages you'll find online.

What the Plumbing Actually Costs Inside a Remodel

When people talk about remodel costs, the plumbing often gets lumped into one line item. Here's what the plumbing portion typically breaks down to:

Fixture rough-in (moving supply lines and drains to new locations): $1,500-$4,000 per bathroom depending on how far things move and what's behind the walls.

Fixture installation (connecting new faucets, toilets, showers, tubs): $800-$2,500 depending on how many fixtures and their complexity. A freestanding tub or wall-mounted faucet takes more labor than a standard drop-in.

Water heater upgrade (if the remodel adds fixtures or you want to switch to tankless): $1,200-$4,500 depending on type and whether gas line work is involved.

Drain and vent modifications: $500-$3,000. This is the part most people don't think about. Every fixture needs a properly sized vent connection to drain correctly. Moving a toilet or adding a shower in a new location often requires vent stack changes that affect the wall cavity or attic space above.

Remodel Candidates Across the Triangle

Apex and Cary homes built in the early 2000s are hitting the sweet spot for remodeling. They're 20+ years old. The builder-grade fixtures, cabinets, and tile are dated. The floor plans are good but the finishes look tired. And the plumbing behind those walls, while functional, may be showing early signs of age. It makes sense to update the plumbing while the walls are already open for a cosmetic remodel.

We also see a lot of homeowners in older Raleigh neighborhoods taking on bathroom remodels in homes from the 60s, 70s, and 80s. Those projects tend to have more plumbing scope because the drain systems are older (sometimes cast iron that's deteriorating) and the supply lines may be galvanized steel or old copper with developing pinhole leaks. Updating those during a remodel is the smart move since the walls are open and the incremental cost is far less than doing it as a standalone project later.

The Permit Question

North Carolina requires permits for any plumbing modification that changes the layout of supply lines, drains, or vent stacks. Moving a toilet, adding a shower, relocating a kitchen sink: all require a plumbing permit and inspection by Wake County.

This matters for two reasons. First, unpermitted plumbing work can create problems when you sell the home. Inspectors flag it, buyers get nervous, and you may end up paying to redo work or reduce your sale price. Second, permitted work gets inspected, which means someone other than the contractor verifies the work meets code. That's your protection.

Element Service Group handles all permitting as part of our remodel plumbing service. We pull the permits, schedule the inspections, and make sure everything passes. It's built into our process, not an add-on.

How the Process Works With Us

Step 1: Free remodel estimate. Our licensed plumber visits your home, reviews your plans (or helps you develop them), and provides a detailed written quote for all plumbing work. No charge, no obligation.

Step 2: Scope and schedule. We coordinate with your general contractor or, if you're managing the project yourself, we help you understand the sequencing. Plumbing rough-in happens early (after demo, before drywall). Fixture installation happens near the end (after tile and paint).

Step 3: Rough-in work. We run new supply lines, set drain locations, and install vent connections according to code. This gets inspected before walls close up.

Step 4: Finish work. Once the room is finished, we install and connect all fixtures: faucets, toilets, showers, tubs, disposals, and supply connections. We test everything for leaks and proper function before we consider the job complete.

Things to Decide Before You Start

Where do you want the fixtures? Even small moves (shifting a toilet 12 inches, centering a vanity on a different wall) have plumbing implications. Decide fixture layout before demo day.

What fixtures are you using? We need spec sheets or model numbers to rough-in the correct supply and drain positions. Different faucets mount differently. Different toilets have different rough-in dimensions. Getting this wrong means redoing work.

Do you want to future-proof anything? If you think you might add a bidet seat, a second showerhead, or under-sink filtration, now is the time to run those lines. Adding a water line or drain after the walls close costs five times what it costs during a remodel.

We're veteran-owned with over 700 five-star reviews from Triangle homeowners. Our plumbers handle the remodel plumbing while you focus on the design and finishes. Upfront pricing, licensed work, and permitted installations that protect your investment.