Faucet & Fixture Services in Apex, NC
Free plumbing inspection ($89 value). Repair or replace — honest recommendation, upfront pricing.
Should You Repair or Replace a Leaky Faucet?
Repair it if the faucet is less than 8 years old and the problem is a worn cartridge, O-ring, or valve seat. Replace it if the faucet is older than that, showing corrosion, or you're dealing with repeated leaks after previous repairs. A single repair typically runs $150-$250 including parts. A new faucet installation runs $250-$500 depending on the fixture. At a certain point, putting money into an old faucet stops making sense.
Here's the math that makes the decision easy: a faucet dripping once per second wastes over 3,000 gallons per year. With Wake County water rates climbing steadily over the past few years, that drip is costing you real money on every utility bill. The repair pays for itself quickly either way.
How to Tell What's Wrong With Your Faucet
Not all faucet problems point to the same fix. Here's what the symptoms actually mean:
A steady drip from the spout when the handle is off means the internal cartridge or valve seat is worn. This is the most common faucet problem and usually the cheapest to fix. On single-handle faucets, it's almost always the cartridge. On two-handle faucets, it could be a washer, seat, or cartridge depending on the type.
Water leaking from the base of the faucet when you turn it on points to a failed O-ring or worn-out mounting hardware. If catching it early, an O-ring replacement is simple. If the base has been leaking for a while, water may have damaged the countertop or cabinet underneath.
Low water pressure from one faucet (while others are fine) usually means a clogged aerator or a partially closed supply valve. Unscrew the aerator and check for mineral buildup. Wake County water has moderate hardness, and calcium deposits build up inside aerators and cartridges over time.
Handles that are hard to turn or won't stay in position mean the internal stem or cartridge is corroding or seizing. This gets worse, not better. Once the handle mechanism starts failing, replacement is the better investment.
The Builder-Grade Problem in Triangle Homes
Thousands of homes across Apex, Cary, Holly Springs, and Fuquay-Varina were built during the late 90s and 2000s housing boom. Builders installed the cheapest fixtures that met code. Those faucets, showerheads, and toilet fill valves were designed to last 8-12 years. The math is simple. If your home was built in 2005, those original fixtures are now 20+ years old and well past their expected life.
We see this pattern constantly. A homeowner calls about one dripping kitchen faucet, and during the inspection our techs notice the bathroom faucets are showing the same early signs. The shower valve is getting stiff. The toilet runs intermittently. It's not that everything fails at once. It's that everything was installed at once, with the same quality level, and it all ages on the same timeline.
What a Fixture Upgrade Actually Involves
Replacing a faucet isn't always as simple as unscrewing the old one and bolting on the new one. Here's what our plumbers check during every fixture service:
Supply line condition. The flexible lines connecting your faucet to the shutoff valves deteriorate over time. If they're original to the home, we replace them during the faucet swap. A burst supply line under a sink can cause thousands in water damage.
Shutoff valve function. We test the angle stops under each sink. If they're frozen open (won't turn), we replace them. You need working shutoffs for any future maintenance.
Drain connection and condition. While we're under the sink, we inspect the drain assembly, P-trap, and connections. Replacing a faucet is the perfect time to catch a slow drain leak you haven't noticed yet.
Mounting surface condition. If a base leak has been present for a while, the countertop or vanity around the faucet holes may have water damage. We'll let you know before installing a new fixture on a compromised surface.
Our Approach to Faucet and Fixture Work
Element Service Group offers a free plumbing inspection, an $89 value, with every service call. Our techs look at the full picture, not just the one faucet you called about. You get an honest recommendation on what needs repair, what needs replacement, and what can wait. Pricing is upfront, on paper, before any work begins.
We're a veteran-owned company with over 700 five-star reviews from homeowners across the Triangle. We stock common cartridges and parts on our trucks for same-day repairs. For fixture replacements, we can install hardware you've purchased or help you choose the right fixture for your setup and budget.
Whether it's a single dripping faucet or a whole-home fixture upgrade, the process starts with a clear diagnosis and a price you agree to. No guessing, no upselling, no inflated quotes designed to push you toward the more expensive option.
Problems We Fix
Our experts can diagnose and resolve any issue
Persistent Faucet Dripping
A dripping faucet wastes over 3,000 gallons of water per year. In the Triangle area, hard water minerals accelerate wear on rubber washers and cartridge seals, causing drips to develop faster than in soft-water regions.
Low Flow or Uneven Temperature
Mineral deposits from Wake County's moderately hard water clog aerators and restrict internal passages in faucet bodies, leading to weak flow, sputtering, or difficulty finding a comfortable temperature.
Corroded or Seized Shut-Off Valves
Many Apex-area homes have original gate-style shut-off valves under sinks that corrode over time and won't fully close. This becomes a serious problem when you need to stop water flow for an emergency or repair.
Loose or Wobbly Faucet Base
Repeated use loosens the mounting hardware beneath the sink. A wobbly faucet stresses supply line connections and can eventually cause leaks at the base that damage countertops and cabinets below.
Why Choose Element Service Group for Faucet & Fixture Services
We're your trusted partner for all Faucet & Fixture Services needs

Proper Installation Matters
A faucet installed incorrectly can leak behind the wall, damage your countertop, or void the manufacturer's warranty. Our plumbers follow exact specifications for every brand and model to ensure a lasting, leak-free installation.
Hard Water Expertise
We help Triangle-area homeowners choose fixtures that stand up to local water conditions. Ceramic disc valves, spot-resistant finishes, and easy-clean aerators make a real difference when you're dealing with mineral-rich water.
Complete Service, Not Just the Faucet
We inspect and upgrade shut-off valves, replace aging supply lines, and check for hidden moisture damage beneath the sink. You get a complete solution, not just a new fixture bolted onto old problems.
Clean, Careful Workmanship
We protect your countertops and cabinetry during installation, clean up completely, and test every connection. We treat your home like it's our own and leave it better than we found it.
Frequently Asked Questions About Faucet & Fixture Services
Get answers to common questions about our faucet & fixture services services
Can you install a faucet I purchased myself?
Absolutely. We're happy to install customer-supplied faucets. Just make sure the faucet is compatible with your sink's hole configuration (single-hole, three-hole, or widespread). If you're unsure, send us a photo and we'll confirm before your appointment.
How long does a faucet installation take?
A straightforward faucet replacement typically takes 45 minutes to an hour. If we need to replace shut-off valves or supply lines — which we often recommend in older Apex homes — add another 20 to 30 minutes.
Is it worth repairing my old faucet or should I replace it?
If your faucet is less than 10 years old and the issue is a worn cartridge or O-ring, repair is usually the most cost-effective choice. For older faucets with multiple problems, corroded bodies, or discontinued parts, replacement gives you better long-term value and improved water efficiency.
What faucet brands do you recommend for hard water areas?
We frequently recommend Delta with Diamond Seal technology, Moen with their Duralast cartridge, and Kohler ceramic disc models. These are specifically designed to resist mineral buildup and maintain smooth operation for years in hard water conditions like we have in the Triangle.
Related Plumbing Services
Explore our other plumbing services
Water Heater Repair
No hot water? We diagnose and repair tank and tankless water heaters of all brands with upfront pricing and fast turnaround.
Water Heater Installation
Tank and tankless water heater options properly sized for your household. Professional installation with same-day availability.
Tankless Water Heaters
Endless hot water on demand with energy-efficient tankless systems. Save space, save energy, and never run out of hot water.
Related Articles & Tips
Learn more about Faucet & Fixture Services from our experts
The Ultimate Home Plumbing Maintenance Checklist
Regular plumbing maintenance helps you avoid major issues and keeps your system running smoothly. Follow this comprehensive 10-point checklist to protect your home from costly repairs and extend the life of your plumbing system.
When to Replace Your Plumbing Fixtures: Signs You Need an Upgrade
Knowing when to upgrade your plumbing fixtures saves money, improves efficiency, and enhances your home's value. Learn the six key signs that indicate it's time for a replacement.
10 Common Plumbing Problems and How to Fix Them
Every homeowner faces plumbing issues eventually. Learn how to identify and fix the 10 most common plumbing problems, and know when to call in professional help.