Pipe Repair in Apex, NC

Pipes burst in North Carolina for three main reasons: freezing temperatures, soil movement, and material failure. Each one shows up differently, damages your home differently, and requires a different repair approach. Understanding which one you're dealing with helps you make better decisions when a plumber is standing in your living room giving you options.

Freezing: The January and February Problem

When overnight temperatures drop into the 20s, water inside your pipes expands as it freezes. That expansion generates enormous pressure, enough to split copper, crack PEX, and blow apart old galvanized joints. The pipes most at risk are in exterior walls, uninsulated crawl spaces, and garages. Irrigation lines and hose bibs are almost guaranteed to freeze if not winterized.

Triangle homeowners get hit hardest during those January and February cold snaps when temperatures plummet quickly. Pipes that survive a gradual cool-down can fail when temps drop 30 degrees in a few hours. The pipe doesn't always burst at the frozen section either. The pressure buildup can cause a failure anywhere in the line between the freeze point and a closed faucet.

If you suspect a frozen pipe (no water from a faucet during freezing temps), call before it bursts. Our techs can often locate and thaw the freeze point, saving you the cost and damage of a full rupture. Element Service Group provides emergency pipe repair around the clock, with a free plumbing inspection ($89 value) on every call.

Soil Movement: Wake County Clay at Work

The clay soil across Apex, Holly Springs, Fuquay-Varina, and much of Wake County creates a slow-motion problem underground. When it rains, clay swells. During dry spells, it shrinks and cracks. That constant expansion and contraction shifts the ground around your underground water and sewer lines, stressing joints and creating small cracks that grow over time.

You might not notice underground pipe damage for months or even years. Signs include unexplained wet spots in the yard, a sudden spike in your water bill, reduced water pressure, or sewage smells near foundation vents. By the time these symptoms appear, the pipe has usually been leaking for a while.

Our approach to underground pipe problems starts with a camera inspection. We feed a small camera into the line to see exactly where the damage is, what caused it, and how extensive it is. This avoids guesswork and unnecessary digging. Depending on what we find, we may recommend a spot repair, a section replacement, or in some cases, trenchless pipe lining that rehabilitates the pipe without excavating your yard.

Material Failure: The Pipes Themselves

Some pipe materials have a track record of premature failure in North Carolina homes.

Polybutylene pipes are the biggest concern. This gray plastic piping was installed in homes built from the early 1980s through the mid-1990s across the Triangle. It was marketed as the pipe of the future. It wasn't. Polybutylene reacts with chlorine and other oxidants in municipal water, becoming brittle from the inside out. Failures can be sudden and catastrophic with no warning signs. If your home has polybutylene (check in the crawl space, at the water heater, or under sinks for gray flexible tubing), a full repipe is the safest path forward.

Galvanized steel pipes were standard in homes built before the 1970s. Older Raleigh neighborhoods still have plenty of them. Galvanized pipes corrode from the inside, building up rust and mineral deposits that gradually restrict water flow. The first sign is often low water pressure. Eventually, the corrosion eats through the pipe wall and you get leaks. If your galvanized pipes are showing reduced pressure or rust-colored water, replacement is a matter of when, not if.

Copper pipes are more durable but not immune to problems. Pinhole leaks develop from the inside due to water chemistry, and copper joints can fail if they were poorly soldered during installation. Many homes in Raleigh and Cary from the 1970s-1990s have copper throughout, and pinhole leaks in these systems are increasingly common as they age past 30-40 years.

What Pipe Repair Costs

Pipe repair costs vary widely based on location, material, and scope:

A single pipe repair where the break is accessible (under a sink, in a crawl space, in an exposed wall) typically runs $200-$600.

A pipe repair that requires opening a wall or ceiling adds drywall work and runs $500-$1,200.

Slab leak repairs, where the pipe runs under your concrete foundation, range from $1,500-$4,000+ depending on whether we repair in place or reroute the line overhead.

A full or partial repipe for a home with failing polybutylene or galvanized lines ranges from $4,000-$15,000+ depending on the size of the home and accessibility.

We provide exact pricing before starting work. No ranges, no estimates that balloon once we're into the job. You get a number and that's the number.

Don't Wait on Pipe Problems

Small leaks become big leaks. A pinhole drip inside a wall can run for weeks before you see the stain, and by then the framing, insulation, and subfloor may have mold and rot. A slow sewer line crack attracts tree roots that turn a small repair into a major excavation.

Element Service Group is veteran-owned and trusted by over 700 Triangle families with five-star reviews. If you see signs of a pipe problem, whether it's a visible leak, a mystery water bill spike, or reduced pressure, get it diagnosed before it escalates.