Skip to main content
Services

Hansgrohe Faucet & Fixture Services in Apex

Element Service Group services and repairs Hansgrohe equipment for Apex homes and businesses.

NC HVAC License (H-2, H-3, Class 1)Emergency Service
Step 1 of 2

What do you need?

Tap the closest match.

When works best? (optional)

Hansgrohe Faucet & Fixture Services: what you need to know

Faucet and fixture service usually starts with one question: repair or replace? Repair a leaky faucet if it's less than 10 years old and the problem is a worn cartridge, O-ring, or valve seat. Replace it if the faucet is older than that, showing corrosion, or you're dealing with repeated leaks after previous repairs. A single repair typically runs $150-$250 including parts. A new faucet installation runs $250-$500 depending on the fixture. At a certain point, putting money into an old faucet stops making sense.

Don't let a drip slide, either. The EPA estimates that a faucet dripping once per second can waste more than 3,000 gallons a year, and you pay for that water on every utility bill.

How to Tell What's Wrong With Your Faucet

Not all faucet problems point to the same fix. Here's what the symptoms actually mean:

A steady drip from the spout when the handle is off means the internal cartridge or valve seat is worn. This is the most common faucet problem and usually the cheapest to fix. On single-handle faucets, it's almost always the cartridge. On two-handle faucets, it could be a washer, seat, or cartridge depending on the type.

Water leaking from the base of the faucet when you turn it on points to a failed O-ring or worn-out mounting hardware. If you catch it early, an O-ring replacement is simple. If the base has been leaking for a while, water may have damaged the countertop or cabinet underneath.

Low water pressure from one faucet (while others are fine) usually means a clogged aerator or a partially closed supply valve. Unscrew the aerator and check for debris. Municipal water in Cary, Apex, and Raleigh is soft, so heavy mineral scale is less common here than in many places, but sediment and debris still collect in aerators and cartridges, and homes on well water can see real mineral buildup.

Handles that are hard to turn or won't stay in position mean the internal stem or cartridge is wearing out or seizing. This gets worse, not better. Once the handle mechanism starts failing, replacement is the better investment.

The Builder-Grade Problem in Triangle Homes

A lot of homes across Apex, Cary, Holly Springs, and Fuquay-Varina were built during the late 90s and 2000s housing boom, and many came with basic builder-grade fixtures. If your home was built in 2005 and still has its original faucets, showerheads, and toilet fill valves, they're now about 20 years old.

We see this pattern constantly. A homeowner calls about one dripping kitchen faucet, and during the inspection our techs notice the bathroom faucets are showing the same early signs. The shower valve is getting stiff. The toilet runs intermittently. Everything doesn't fail at once, but everything was installed at once, with the same quality level, and it all ages on the same timeline.

What a Fixture Upgrade Actually Involves

Replacing a faucet isn't always as simple as unscrewing the old one and bolting on the new one. Here's what our plumbers check during every fixture service:

Supply line condition. The flexible lines connecting your faucet to the shutoff valves deteriorate over time. If they're original to the home, we replace them during the faucet swap. A burst supply line under a sink can cause serious water damage.

Shutoff valve function. We test the angle stops under each sink. If they're frozen open (won't turn), we replace them. You need working shutoffs for any future maintenance.

Drain connection and condition. While we're under the sink, we inspect the drain assembly, P-trap, and connections. Replacing a faucet is the perfect time to catch a slow drain leak you haven't noticed yet.

Mounting surface condition. If a base leak has been present for a while, the countertop or vanity around the faucet holes may have water damage. We'll let you know before installing a new fixture on a compromised surface.

Our Approach to Faucet and Fixture Work

A faucet or fixture visit starts with our $49 service call and diagnostic for new customers, and we also offer a free whole-home plumbing inspection. Our techs look at the full picture, not just the one faucet you called about. You get an honest recommendation on what needs repair, what needs replacement, and what can wait. Pricing is upfront, on paper, before any work begins.

We're a veteran-owned company with over 900 five-star reviews from homeowners across the Triangle. We stock common cartridges and parts on our trucks for same-day repairs. For fixture replacements, we can install hardware you've purchased or help you choose the right fixture for your setup and budget.

From a single dripping faucet to a whole-home fixture upgrade, the process starts with a clear diagnosis and a price you agree to. No guessing and no upselling.

What's included with Hansgrohe Faucet & Fixture Services

  • Expert installation of all major faucet brands including Moen, Delta, Kohler, and Grohe
  • Ceramic disc valve faucets recommended for Triangle-area hard water conditions
  • Old fixture removal and disposal included with every installation
  • Leak testing at every connection point before we consider the job complete
  • Single-handle, double-handle, touchless, and commercial-style options available
  • ADA-compliant fixture installations for accessibility needs
  • Backed by manufacturer warranty plus our own labor guarantee
FAQ

Hansgrohe Faucet & Fixture Services questions, answered

Schedule Your $49 New Customer Diagnostic

Step 1 of 2

What do you need?

Tap the closest match.

When works best? (optional)

Licensed & Insured

Fully licensed and insured for your protection

24/7 Emergency HVAC

Available when you need us most

16+ Years

Over a decade of trusted service

ScheduleCall now